D-Link DIR-842 User Manual page 77

Section 4 - Connecting to a Wireless Network
To connect to the network, click Connect.
To automatically connect when your device is in range, click the
Connect Automatically check box. Your computer will now
automatically connect to this wireless network whenever it is
detected.
You will then be prompted to enter the Wi-Fi password (network
security key) for the wireless network. Enter the password into the
box and click Next to connect to the network.
You can also use Wi-Fi Protected Setup (WPS) to connect to the
wireless network. Press the WPS button on your device and you will
be automatically connected.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct.
The key or passphrase must be exactly the same as the one on the
wireless router.
D-Link DIR-842 User Manual 73