D-Link DIR-842 User Manual page 30

Section 4 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP
does not give you an IP address to use.
Host Name:
The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
The default MAC address is set to the physical MAC address of the
Clone:
router. You can use the drop-down menu to replace the Internet
port's MAC address with the MAC address of a connected client.
Click Save when you are done.
D-Link DIR-842 User Manual
Dynamic IP (DCHP)
26