Table of Contents
Advertisement
GROUNDING THE APPLIANCE
Please read carefully.
Do not use an extension cord or adapter plug with this
appliance. Follow National electrical codes or prevailing
local codes and ordinances.
This warming drawer must be supplied with 120V, 60Hz,
and connected to an individual, properly grounded
branch circuit, and protected by a 15 or 20 amp circuit
breaker or time delay fuse.
A properly grounded 3-prong receptacle should be
located within reach of the drawers' 56" long power
cord.
• Locate the receptacle in an adjacent cabinet.
– within 42" of the right side or,
– within 16" of the left side or,
– A recessed receptacle may be located on the right
side of the cutout, 7" from the back of the cabinet. In
this location, the excess power cord should be coiled
and taped to the right side of the unit.
When two warming drawers are installed side to side,
they can operate from the same receptacle.
31-10700-6
Design Information
Please read carefully.
The power cord of this appliance is equipped with a
3-prong (grounding) plug that mates with a standard
3-prong grounding wall receptacle to minimize the
possibility of electric shock. The customer should have
the wall receptacle and circuit checked by a qualified
Rating Plate
electrician to make sure the receptacle is properly
grounded and has the correct polarity.
Where a standard 2-prong wall receptacle is
encountered, it is the personal responsibility and
obligation of the customer to have it replaced with a
properly grounded 3-prong wall receptacle.
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
FOLLOW NATIONAL ELECTRICAL CODES AND
ORDINANCES
Recessed
Receptacle
7" Max.
From Rear
on Right Side
Drill 1-1/2" Hole
For Power
Cord For Left
or Right Side
Outlet Location
5
Advertisement
Table of Contents
