Sony DVCAM DSR-200AP Operating Instructions Manual page 77

Audio dubbing
Recording
(1) Set the POWER switch to ON and then set CAMCORDER/PLAYER to
PLAYER.
(2) Open the cover, press ·, then ) or 0, to search for the start and end
points of the recording.
(3) Press P at the start point of the recording.
(4) Press AUDIO DUB
(5) Adjust the recording volume.
(6) Press P.
Audio dubbing begins.
If you are using an audio source input, press P on the stereo at the same time.
2
REW PLAY FF
3,
PAUSE
6
To stop recording
Press π.
To pause recording
Press P. To start recording again, press P.
To adjust the volume
If you set REC LEVEL to AUTO, the volume is automatically adjusted.
To adjust the volume manually, set REC LEVEL to MANU, and turn the REC LEVEL
dials.
Note on audio dubbing
You cannot operate audio dubbing on DV-formatted tapes. Depending on signal
conditions, you may not be able to operate audio dubbing even on DVCAM-formatted
tapes.
.
Audio source
: Signal flow
4
AUDIO
DUB
REC LEVEL
77