Table of Contents
Advertisement
Advanced operations
Using alternative power sources
You can choose any of the following power sources for your digital camcorder: battery
pack and the mains. Choose the appropriate power source depending on where you
want to use your digital camcorder.
Place
Indoors
Outdoors
Note on AC power adaptor
Use the recommended AC power adaptor, such us AC-V625.
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply
again immediately.
Using the mains
(1) Connect the mains lead to the AC power adaptor.
(2) Connect the mains lead to the mains, then connect the connecting cord (not
supplied) to the DC OUT jack on the AC power adaptor.
(3) Connect the connecting cord to the DC IN jack on the digital camcorder.
1
38
Power source
Mains
Battery pack
2
Accessory to be used (not supplied)
AC power adaptor AC-V625
Battery pack NP-F950, NP-F750
Battery adaptor NPA-10000
3
DC OUT
DC IN
Advertisement
Table of Contents
