Sunex Tools SX951 Operating Instructions

Operating Instructions •
This operating manual contains important safety information.
Read carefully and understand all information before operating tool.
Save this manual for future use.
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
Free Speed ..................7500 RPM
Max. Torque................420 ft. lbs.
Torque Range ........50-350 ft. lbs.
Air Pressure ........................90 PSI
SX951
Warning Information • Parts Breakdown
SPECIFICATIONS
Air Consumption ..............4 CFM
Sound Level ......................91 dBA
Length ................................7-3/4"
Shipping Wt. ....................5.9 lbs.
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
SX951
1/2" D . H.D.
R
I W
MPACT RENCH
Rev. 02/18/02