Advertisement
WARNING INFORMATION
WARNING
• MAX AIR PRESSURE: 90 PSIG, 6.2 BAR
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WARNING
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.
SX0102
WEAR HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
Max. Free Speed .............................................5,500 RPM (Reverse)
Working Torque .............................................................2,000 ft. lbs.
Breakaway Torque ........................................................3,200 ft. lbs.
Air Inlet ............................................................................. 1/2" NPT
Recommended Hose Size .................................................. 1/2" I.D.
Avg. Air Cons. ......................................................................7.5 CFM
Max. Air
Pressure ...............................................................90 PSIG (6.2 BAR)
Weight (w/side handle) ...................................................... 15.8 lbs.
Length ...................................................................................... 22.8"
Width (w/o side handle) ........................................................ 4.375"
Height ..................................................................................... 10.25"
1" Drive Magnesium
Composite Impact Wrench
SPECIFICATIONS
Copyright © Professional Tool Products, 2025
SX01026
with 6" Anvil
All rights reserved
03/12/2025
Advertisement
Table of Contents
Related Manuals for Sunex Tools SX01026
Summary of Contents for Sunex Tools SX01026
- Page 1 SX01026 1" Drive Magnesium Composite Impact Wrench with 6" Anvil WARNING INFORMATION WARNING • MAX AIR PRESSURE: 90 PSIG, 6.2 BAR ALWAYS READ WEAR HEARING INSTRUCTIONS PROTECTION BEFORE USING POWER TOOLS AVOID PROLONGED EXPOSURE TO ALWAYS WEAR VIBRATION SAFETY GOGGLES...
- Page 2 • Use only approved replacement parts and accessories tool. recommended by Sunex Tools ® . • Keep out of reach of children. • Servicing and repairs should only be made by an •...
-
Page 3: Warning Information
SX01026 1" Drive Magnesium Composite Impact Wrench with 6" Anvil WARNING INFORMATION OPERATION Air Supply Whip Hose Do Not Install Filter Quick Coupling Nipple Nipple This tool is an impacting tool and not a torque meter. When specific Here torque is required, it must be checked with a torque meter after fitting the fastener with the impact. - Page 4 . This warranty gives you specific legal rights and you may also have other ® rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the ®...
-
Page 5: Parts List
SX01026 1" Drive Magnesium Composite Impact Wrench with 6" Anvil PARTS LIST Item Part No Parts Name Item Part No Parts Name RS0102601 HOUSING RS5325624 REAR PLATE RS5325602 PIN VALVE ROD RS5325625 SPRING PIN (EACH) RS533702 O-RING RS5325626 CYLINDER RS0102604...
Need help?
Do you have a question about the SX01026 and is the answer not in the manual?
Questions and answers