Sunex Tools SX1202 Operating Manual

OPERATING MANUAL
S P E C I F I C A T I O N S
Free Speed ................................................ 10,000 RPM
Breakaway Torque ....................................1,650 ft. lbs.
Maximum Torque .........................................750 ft. lbs.
Air Inlet ........................................................... 1/4" NPT
Average Air Consumption ...............................5.5 cfm
Recommended Hose Size ............................... 3/8" I.D.
Net Weight ....................................................... 3.6 Lbs.
Overall Length ......................................................... 7.2"
Sound Pressure ............................................. 96.8 dBA
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
SX1202
WARNING INFORMATION
•
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
1/2" Drive Magnesium Composite
PARTS BREAKDOWN
•
WARNING
1
SX1202
MT2748
MT2748G
Impact Wrench
MT2748M
© Copyright 2025, SUNEX Tools
®
01/13/25