Ronix 8641 Manual
Hide thumbs Also See for 8641:

Advertisement

Quick Links

VACUUM CLEANER
8641

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8641 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ronix 8641

  • Page 1 VACUUM CLEANER 8641...
  • Page 2: Technical Specifications

    150W Vacuum Pressure >10KPA Airflow Rate 20L/S Weight 4.69Kg Supplied in Ronix color box Plastic hose, Stainless steel telescopic tube, Washable HEPA Includes filter, Sponge filter, Wet and dry brush, Round brush, crevice nozzle, 4 wheels PART LIST Plastic hose...
  • Page 3 4. Always check the battery catridge before use. It should be in a good condition and must not be damaged. If the battery is damaged or defective, it must be replaced by Ronix service company. 5. Make sure the battery catridge is well and properly charged, and plugged in before starting the cleaner.
  • Page 4 6. Ensure the appliance is switched off before unplugging the battery. 7. Do not handle or operate the appliance with wet hands and follow electrical safety precautions all the time. 8. Extreme caution should be exercised when using the appliance on stairs.
  • Page 5 ASSEMBLY 1. Assemble the wheels to vacuum cleaner base tightly (4pcs). 2. Fit the base to the bottom of the vacuum cleaner as the picture shows, and press the joints in 4 directions. 3.Connect the plastic hose end with the suction port, and turn it clockwise as the picture shows VACUUM CLEANER...
  • Page 6 4. Insert the handle into the plastic tube; make sure the connection is tight enough. 5.Connect the 3pcs plastic tubes together. 6. Connect the wet&dry brush with The plastic tube. USER MANUAL...
  • Page 7 7.Fit the HEPA filter as the picture shows turn it clockwise to lock. 8. Fit the paper bag inside the tank; lock it on the suction port. 9. Fasten the clips VACUUM CLEANER...
  • Page 8 10. Plug in the battery catridge. 11.Close the waterproof cover cleaner. 12.Press the switch to start the cleaner. ‘I’ stands for ‘on’; ‘o’ stands for ‘off’. USER MANUAL...
  • Page 9: Operation

    OPERATION SPONGE FILTER HEPA FILTER -Before operating this machine, please make sure that the corresponding filters are fitted properly according to different cases. -All the filters are consumbles. Please contact with your local stores for buying the necessary spares. DRY VACUUM CLEANING 1.
  • Page 10: Maintenance

    2. For sucking trash with little liquid mixed, please fit the sponge filter + HEPA filter. 3. The paper bag is not advised when cleaning Wet things. 4. Clean the tank after each use. Avoid leaving dust or liquid in the tank.
  • Page 11: Troubleshooting

    TROUBLESHOOTING TROUBLE POSSIBLE CAUSE REMEDY Clean dirt from filter. If Clogged filter condition continues, change the filter Check the connection of all the accessories (floor tool, Air leak hoses, etc.). Check that clips Suction are fastened properly weakens Check floor tool, hose, etc. Obstruction in hose or floor tool obstructions, and remove if...

Table of Contents