Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 1230
Summary of Contents for Ronix 1230
- Page 1 WET & DRY VACUUM CLEANER 30L 1230...
-
Page 3: Specifications
SPECIFICATIONS Model 1230 Tank Capacity 30 L Power 1400 W Voltage 230 V Frequency 50Hz Air Flow 1.9 m³/min Pressure 18 Kpa PARTS LIST Sliding block Handle Switch Blower Carring handle Extension tube Locking block Floor brush Power cord plug... -
Page 4: Safety Direction
SAFETY DIRECTION IMPORTANT SAFE GUARD When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING! To reduce the risk of fire, electric shock, or injury: - Do not use outdoors. - Do not leave vacuum cleaner when plugged in. -
Page 5: Operation Method
- Use extra care when cleaning on stairs. - Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present. - Store your cleaner indoors in a cool, dry area. - ENSURE you turn the unit off at the very minimum every 15 minutes (for 1 minute) to let the motor cool down - failure to do so may cause motor failure. - Page 6 2- (1)Install castor wheels into the hole on the base. (2)Install the big wheel into the relevant position and then fix the wheel with screw. Please kindly keep the mark on the big wheel («R» or «L») same as the one («R» or «L») on wheel base. 3- Put the hose connector into (1), the suction function is available Put the hose connector into (2) the blow function is available 4- Insert the handle into the tube with a twisting force.
- Page 7 5- Same as picture one 6- Hold the plug and insert into socket. 7- Only choosing (AUTO) button, vacuum cleaner works while the electric tool dose vacuum cleaner stops working after electric tool is closed. Only choosing1nbutton, vacuum cleaner works yet the electric tool doesn`t work When the (AUTO) button and (I) button is in the same level, bosh the vacuum cleaner and electric tool don`t work for the electricity is cut off.Switch off the power tool when plug in or/and VC Switch is being adjusted.
-
Page 8: Maintenance
8- You can adjust the airflow by push the sliding block up and down. TO REPLACE DUST BAG If the dust barrel is full, please empty it as soon as possible 1) Release the lock block to open the up housing 2) Empty the dust barrel 3) Put back the up housing, and fasten the locking block. - Page 9 2) Clean it carefully 3) Dry by airing 4) Put back the filter USER MANUAL...
Need help?
Do you have a question about the 1230 and is the answer not in the manual?
Questions and answers