Table of Contents
Advertisement
TRIP METER FUNCTION
When the hours of machine operation accumulates up to
the preparatorily set-hour, the trip meter advises the op-
erator that the remaining hours from the set-hour become
zero by flashing the trip mark either "TRIP 1" or "TRIP 2."
The trip mark keeps flashing for 30 seconds when the
hours of machine operation accumulates up to the prepa-
ratorily set-hour. Until the trip meter is reset, the trip mark
flashes for 30 seconds each time the key switch is turned
"ON" afterward.
IMPORTANT: The hours of operation indicated on the
trip meter is the hours of machine opera-
tion counted after the trip meter is set, be-
ing different from the accumulated hours
of operation displayed by the hour meter.
NOTE: Regardless of the type of information the LCD
indicates, the trip meter function is kept acti-
vated once it is set. Therefore, whenever the
hours of operation accumulates to the set-hour,
the trip mark flashes irrespective of the cur-
rently displayed information.
When the trip mark flashes with the trip meter
displayed on the LCD, the trip mark stays "ON"
after flashing. In case information other than the
trip meter is display when the trip mark flashes,
the trip mark is deleted after flashing.
Trip Meter Setting
1. Turn the key switch "ON". Display "Trip Meter 1" of
"Trip Meter 2" by operating display selection switch
(3).
NOTE: Different hour setting can be made independ-
ently to " Trip Meter 1" and "Trip Meter 2."
2. Select the hour desired to set by pressing SET switch
(4). The set-hour shifts as follows each time SET
switch (4) is pressed.
50
100
150
1000
1250
4000
4500
When the SET switch is kept depressed for 2 seconds, the
set-hour will shift in the fast forward (FF) mode.
3. When the hour desired to set is displayed, press dis-
play selection switch (3) to set the trip meter.
NOTE: After the trip meter is set, the LCD (when the
trip meter is displayed) displays how many
hours are remaining before the hours of ma-
chine operation accumulates to the set-hour.
Accordingly, when trip mark flashes, the trip
meter indicates "0 hr." Until the trip meter is re-
set, the excess hours (with mark "-") of opera-
tion is displayed on the trip meter afterward.
OPERATOR'S STATION
200
250
300
400
1500
2000
2500
5000
500
750
3000
3500
1-8
When Trip Meter 1 is displayed:
When Trip Meter 2 is displayed:
3
4
M1CC-01-100
Trip Mark
M178-01-007
Trip Mark
M178-01-008
Advertisement
Table of Contents
