Offset Arm Front - Hitachi ZAXIS 70 Operator's Manual

OFFSET ARM FRONT

ZAXIS70, 70LC
Offset Control Pedal
Pedal (2) is located at the operator's right foot.
Offset Operation
1. Turn cover (1) forward to unlock pedal (2).
2. Push down on the left side of the pedal to move the
arm to the left offset position.
3. Push down on the right side of the pedal to move the
arm to the right offset position.
4. turn cover (1) backward to lock pedal (2) when the
arm offset operation is no longer required.
The center position of the arm (offset 0) can be confirmed
by consulting the gauge at the top end of the boom.
OPTIONAL ATTACHMENTS AND DEVICES
13-9
1
2
M1CC-13-014
Offset Guage
M152-14-003
(Offset 0)