Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BYECOLD HH0606L
Summary of Contents for BYECOLD HH0606L
- Page 1 INFRARED HEATER PANEL WITH LED LIGHT INSTRUCTION MANUAL (EN + DE)
-
Page 2: Table Of Contents
SYMBOLS CONTENT 1┃WARNING & PRECAUTION Warning This signal word indicates a hazard with an average 2┃FEATURES risk level which, if not avoided, can result in serious injury or death. 3┃TECHNICAL INFORMATION Warning of electrical voltage 4┃SCOPE OF SUPPLY This symbol indicates dangers to the life and health of persons due to electrical voltage. -
Page 3: Warning
1┃WARNING & PRECAUTION Warning Read this manual carefully before starting or using the device. Always store Do not use the device in small rooms if persons are present who cannot the manual in the immediate vicinity of the device or its site of use! leave the room independently and who are not under constant supervision. -
Page 4: 3┃Technical Information
Power Power Frequency Current • Do not place the device on combustible ground. 1.7A HH0606L 655*630*35 370W • Do not transport the device during operation. • Do not touch the surface during the device working to avoid burns. HH1006L 1080*630*35... -
Page 5: 4┃Scope Of Supply
4┃SCOPE OF SUPPLY 6┃INSTALLATION Warning • (A)1 x heating device • Mounting work must be carried out by professional electrician ! • (B)4 x Screws • Do not suspend panels by heating power cord ! • No any sticking ways are allowed to be used for hanging or suspending support ! •... -
Page 6: 7┃Thermostat
7┃ THERMOSTAT Specification • Battery-powered: DC 4x 1.5V AAA batteries (not included) • Set temperature range: 0°C ~ 45°C, resolution: 1°C • Room temperature range: 0°C ~ 50°C, display resolution: 0.1°C 3. Push the rear of the left long frame into the hook, and then push back to make the •... - Page 7 temperature, thermostat will send ON commands to panel to turn on heating Press ON/OFF button to turn the thermostat on/off. function. When thermostat is turned Off, the LCD will only display current room 3. The screen display shows the setting temperature as well as the measured temperature reading.
- Page 8 Step 1. Once in 5+2 mode, Press and hold the SET button for 3-5 seconds until Program icon ① and MON TUE WED THU FRI is displayed with ON and Time Icon flashing on screen. Step 2. Press ▲ button to adjust hour(+1hour/press) and press ▼ to adjust Minute(+5minutes/press) to set the starting time of Program ①.
-
Page 9: 8┃Troubleshooting
Make sure the Programming function has been switched to ON by long press Warning of electrical voltage MODE setting if you want to use any programming mode. Do not cover or touch the temperature sensor which is at the top of the Tasks which require the housing to be opened must only be carried thermostat. -
Page 10: 11┃Technical Annex
11┃TECHNICAL ANNEX 12┃DISPOSAL Information requirements for electrical local space heaters Item Unit Type of heat input, for electric storage local space heaters only (select one) manual heat charge control, with integrated thermostat The icon with the crossed-out waste bin on waste electrical or electronic equipment manual heat charge control with room and/or outdoor stipulates that this equipment must not be disposed of with the household waste at the end of its life.