Set-Up For Adjustment Of Tatsujin; Service Information - Panasonic NV-VZ14EN Service Manual

No. Parts No.
/ 12 VFK1738A2025 /
& /
VFK1737A20CB
/ 13 VFK1738A1625 /
& /
VFK1737A16CB
/ 14 VFK1738A1325 /
& /
VFK1737A13CB

3.2. SET-UP FOR ADJUSTMENT OF TATSUJIN

For adjustment of " TATSUJIN ", please open the small cover which is located at bottom of side
case(L) using small screwdriver as follows.
And then connect the JIG board and TATSUJIN cable as follows.

4. SERVICE INFORMATION

4.1. EMAGENCY DISPLAY
Whenever some abnomal signal is input to the mechacon CPU, an error number (E01, as an
example) is displayed in the electronic view finder.
In every error status, such the message as shown below alternately appear over and over.
- In an emagency mode, all operations except turning on/off the
POWER switch are ineffectual.
Example (in case of the error number E01):
Pin Part name
/ 20 / Flat Cable &
Extention Board
/ 16 / Flat Cable &
Extention Board
/ 13 / Flat Cable &
Extention Board
Connection
/ CN9012-EVF B/W
/ CN9013-Top Operation at Side
case(L)
/ CN9018-Side Operation at Side
case(R)
6
Q'ty Remarks
/ 1 / New
/ 1 / New
/ 1 / New