Table of Contents
Advertisement
Chapter 6
6 3
Configure DHCP Server
The Mobile Wi-Fi acts as a DHCP (Dynamic Host Configuration Protocol) server,
dynamically assigning TCP/IP parameters to devices from the IP Address pool.
You can change the settings of the DHCP server if necessary.
1. On your computer or tablet, visit http://tplinkmifi.net, and log in with the
password you set for the Mobile Wi-Fi.
2. Go to
Advanced
3. Enter a new IP address in the
default. And enter the starting and ending IP addresses in the
Address
fields respectively.
Note:
1. The start and end IP addresses should be on the same network segment as the IP address you have
entered.
2. If you have changed the IP address of your Mobile Wi-Fi, you should use the new IP address or
http://tplinkmifi.net
to log in to the web management page.
>
DHCP
Server.
IP Address
Customize Your Network
field and leave the
Subnet Mask
as
Start
and
End IP
39
Advertisement
Table of Contents
Need help?
Do you have a question about the M7000 and is the answer not in the manual?
Questions and answers