Back Door - Toyota Scion 2005 Owner's Manual

To normalize the power windows:
1. Push down the power window switch of
each door and lower the windows half-
way.
2. Pull up the switch until the windows
close and hold the switch for at least
one second.
Make sure that the windows open and
close automatically. If the power windows
cannot be operated properly, have them
checked by your Scion dealer.
20

Back door

12T030
To open the back door, push the back
door opener and raise the door.
The back door can be opened when the
vehicle is stopped.
The back door can be locked or unlocked
in the following ways.
D
Operate the power door lock switch.
(See "Side doors" on page 15.)
D
Operate the wireless remote control.
(See "Wireless remote control" on page
11.)
D
The side doors and back door are
locked and unlocked simultaneously
with the driver's door. (See
doors" on page 15.)
When the side doors and back door are
unlocked simultaneously with a key, the
interior lights and ignition switch light will
come on and remain on for about 15 sec-
onds before fading out. (For details, see
"Interior lights" on page 82 and "Ignition
switch light" on page 83.)
If the back door opener does not operate,
see "If you cannot operate back door
opener" on page 188.
If the battery is disconnected or run
down, the back door will be automatically
locked and the back door system may not
work after you reconnect, replace or re-
charge the battery. In any of these cases,
normalize the back door system by follow-
ing procedure.
1. Unlock the back door with the remote
control key or power door lock switch.
2. Close the back door completely by
hand.
If the back door system does not operate
properly after the above procedure, there
may be a problem in the system. Contact
your Scion dealer.
"Side