Toyota Scion 2005 Owner's Manual page 27

Table of Contents

Advertisement

OPERATING
THE
PASSENGER'S
WINDOW
Use
the
switch on
the passenger's
door. The driver's door also has a
switch that controls the passenger's
window.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Lightly pull up the switch.
If you push in the window lock switch on
the driver's door, the passenger's window
cannot be operated.
The indicator lights on the switch tell you
which of the switches can be operated.
Automatic operation: Push the switch
completely down or pull it completely up,
and then release it. The window will fully
open or close. To stop the window part-
way, lightly move the switch in the oppo-
site direction and then release it.
Jam protection function: During automat-
ic closing operation, the window stops and
opens halfway if something gets caught
between the window and body.
If the window receives a strong impact,
this function may work even if nothing is
caught.
CAUTION
To avoid serious personal injury, you
must do the following.
D
Before you close the power win-
dows, always make sure there is
nobody around the power windows.
You
must
also
make
sure
heads, hands and other parts of the
bodies of all occupants are kept
completely
inside
the
vehicle.
someone's neck, head or hands get
caught
in
a
closing
window,
could result in death or serious in-
jury. When anyone closes the power
windows, make sure he or she op-
erates the windows safely.
D
When small children are in the ve-
hicle, never let them use the power
window switches without supervi-
sion. Use the window lock switch to
prevent them from making unex-
pected use of the switches.
D
Be sure to remove the ignition key
when you leave your vehicle.
D
Never leave anyone (particularly a
small child) alone in your vehicle,
especially with the ignition key still
inserted. Otherwise, he/she could
use the power window switches and
get
trapped
in a window. Unat-
tended person (particularly a small
child) can be involved in a serious
the
accident.
D
Never try jamming any part of your
If
body to activate the jam protection
function intentionally.
it
D
The jam protection function may
not work if something gets caught
just
before
the window
closed.
If the battery is disconnected or run
down
The power window may not operate auto-
matically and the jam protection function
will not function correctly after you recon-
nect, replace or recharge the battery. At
this
time,
the
indicator
switches will flash. In any of these cases,
you should normalize the power window
on each door.
is
fully
lights
of
the
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents