Toro 72098 Operator's Manual page 9

1. Engine coolant under
pressure
2. Explosion hazard—read
the Operator's Manual.
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. Warning—read the Operator's Manual; do not operate this
machine unless you are trained; wear hearing protection.
2. Cutting/dismemberment hazard of the hand, mower blade;
entanglement hazard of the hand, belt—stay away from
moving parts; keep all guards and shields in place.
3. Ramp hazard—do not use dual ramps when loading onto a
trailer; use 1 ramp wide enough for the machine; use a ramp
with a slope less than 15°; back up the ramp when loading the
machine and drive forward off the ramp when unloading.
1. Height of cut
117-3276
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
126-8597
2. Range adjustment
decal117-3276
126-8383
4. Runover/backover hazard—do not carry passengers; look
behind you when mowing in reverse.
5. Thrown object hazard—keep bystanders away.
6. Tipping hazard—do not use the machine near drop-offs or
on slopes greater than 15°; only operate across slopes less
than 15°.
decal126-8597
9
decal126-8383