Yamaha GRIZZLY 700 2013 Owner's Manual page 40

● "4WD" (four-wheel drive): Power is supplied to
the rear and front wheels.
To change from two-wheel drive to four-wheel
drive, stop the ATV and push the switch in to the
"4WD" position.
indicator " " comes on in the multi-function dis-
play.
To change from four-wheel drive to two-wheel
4
drive, stop the ATV and push the switch in to the
"2WD" position.
1. On-Command four-wheel-drive switch "2WD"/"4WD"
Then, the four-wheel-drive
2WD
4WD
EBU30461
On-Command differential gear lock switch
"4WD"/"LOCK"
EWB00131
WARNING
Always stop the ATV before changing from
four-wheel drive to four-wheel-drive differen-
tial gear lock or vice versa.
The ATV handles differently in four-wheel drive
than in differential gear lock in some circum-
stances. Changing from four-wheel drive to dif-
ferential gear lock or vice versa while moving
1
may cause the ATV to handle differently unex-
pectedly. This could distract the operator and
increase the risk of losing control and causing
an accident.
EWB00140
WARNING
Always ride at a slow speed when the ATV is in
differential gear lock, and allow extra time and
distance for maneuvers.
All wheels turn at the same speed when the dif-
ferential gear is locked, so it takes more effort
to turn the ATV. The effort needed to turn in-
creases with the riding speed. You may lose
4-10