2. Install the bolts and nut, and then tighten them
to the specified torques.
Tightening torques:
Panel bolt:
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
Footboard nut:
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
Panel H
To remove the panel
1. Remove the seat. (See page 4-18.)
2. Remove the rear carrier by removing the
bolts.
1. Carrier bolt (under the fenders)
8-17
8