Attaching The Bumper Bar; Removing The Bumper Bar - Edwards & Co Oscar M2 Use & Care Manual

OS CA R - U SE + CARE G U I DE

Attaching the bumper bar

1 . Locate the metal pins on either
end of the bumper bar.
2 . Insert the metal pins into the
connection points on either side
of the seat unit until they click into
place. Pull the bumper bar to ensure
it is securely connected.
You will hear a click when the
pins connect securely within the
housing.

Removing the bumper bar

1 . Locate the black release
buttons below the bumper
bar's two connection points.
2 . Press and hold one button
while pulling the end of the
bumper bar out. Repeat at the
other end.
1 8