Summary of Contents for Edwards & Co OSCAR MX HMV501
Page 1
INSTRUCTION MANUAL OSCAR MX HMV501 IMPORTANT - Keep these instructions for future reference. ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS STROLLER. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. Suitable from children 6 months to 20 kg (or newborn to 20kg with the Newborn Insert Cushion accessory).
Page 2
WARNINGS Australia/NZ WARNINGS!: TO AVOID INJURY OR DEATH ALWAYS APPLY THE BRAKES WHEN THE • STROLLER IS STATIONARY. DO NOT LEAVE CHILDREN UNATTENDED. • SECURE THE CHILD IN THE HARNESS AT ALL • TIMES. DO NOT CARRY EXTRA CHILDREN OR BAGS ON •...
Page 3
WARNINGS Europe WARNING!: TO AVOID INJURY OR DEATH Ensure that all the locking devices are engaged • before use. Never leave your child unattended. • To avoid injury ensure that your child is kept • away when unfolding and folding this product. Do not let your child play with this product.
Page 4
GENERAL WARNINGS (cont.) WARNING!: TO AVOID INJURY OR DEATH: • THE MAXIMUM WEIGHT OF THE CHILD USING THIS STROLLER IS NOT TO EXCEED 20KG. • THE MAXIMUM WEIGHT OF THE CHILD USING THIS STROLLER WITH THE CAR SEAT CAPSULE ATTACHMENT IS NOT TO EXCEED 13KG.
Page 5
GENERAL WARNINGS (cont.) WARNING!: TO AVOID INJURY OR DEATH: • Keep away from fire and extreme heat. Do not store in areas that may get particularly hot in summer like roof space or beside shed walls. • Do not place heavy weights on the handle of the stroller as it will impact the stability of the frame.
Page 6
STROLLER COMPONENTS The product should come with the following: Main components • Stroller frame. • Seat unit with harness and bumper bar. • Three wheels. • Sun canopy. • Storage basket. Handlebar Sun canopy Bumper bar Folding trigger Buckle Brake Swivel lock Front wheel Rear wheel...
Page 7
ASSEMBLY: Wheel installation and removal Rear wheels: Removal Press the release button located on the wheel hub and pull the wheel outwards. Rear wheels: Installation Locate the metal rod on the wheel. Whilst pressing the wheel hub release button, insert the rod into the rear wheel housing located on the axle.
ASSEMBLY: Wheel installation and removal Front wheels: Removal Push the button on the back of the wheel housing and pull outwards. Front wheels: Installation Insert the wheel rod into the front wheel housing until you hear a CLICK! Once installed, pull the wheel to confirm a proper connection. CARRYING THE STROLLER We recommend lifting the stroller by grabbing the area near the fold hinge.
ASSEMBLY: Unfolding the stroller Unfolding: Make sure the brake is engaged. 2. Stand the stroller upright. 3. Lift the fold lock located on the right hand side of the frame away from the catch clip. 4. Slowly pull the handle of the stroller upwards. CLICK! 5.
FOLDING THE STROLLER Folding: Note - the seat unit must be in forward facing position, or removed, to fold. Apply the brakes. 2. Adjust the seat recline to an upright position. 3. Locate the two folding triggers. With both hands, slide the triggers towards you.
Page 11
ATTACHING & REMOVING THE SEAT Attaching To install the seat unit, insert the tongues on the seat unit into the stroller frame adapter housing. You can install the seat in forward or reverse position. Removing There are two buttons located on the stroller frame, just underneath where the seat unit’s tongue connects .
SEAT RECLINE To adjust the recline, press the buttons on each side of the seat unit and raise or lower the seat to the desired position. There are three height settings. 1. Upright - suitable from 6 months + 2. Reclined - a sleeping position from 6months+.
Page 13
SEAT RECLINE 3. Lie Flat- suitable from newborn only when used with the Newborn Insert Cushion (sold separately). See next page. FOOT REST To raise or lower the leg rest, press the two buttons on both sides of the leg rest hinge and move to your desired position.
Page 14
USING THE NEWBORN INSERT CUSHION The Newborn Insert Cushion converts the seat unit into an approved safe surface suitable for newborn babies. This accessory can be purchased from Edwards & Co or your nearest retailer. The Newborn Insert Cushion should only be used with the seat unit in fully reclined position.
Page 15
ATTACHING & REMOVING THE CARRY COT Attaching Insert Carry Cot’s adapter tongues into the stroller frame adapter housing. We only recommend installing the Carry Cot in reverse facing position (with baby looking at you). Removing There are two buttons located on the stroller frame, just underneath where the Carry Cot’s tongue connects .
Page 16
ATTACHING & REMOVING AVERY CAR SEAT Attaching Insert Avery’s adapter tongues into the stroller frame adapter housing. We only recommend installing the Avery car seat in reverse facing position (baby looking at you). Removing There are two buttons located on the stroller frame, just underneath where the car seat’s tongue connects .
Page 17
ATTACHING A MAXI-COSI STYLE CAR SEAT Attaching the adapters Locate your Maxi-Cosi/Universal Car Seat adapter (sold separately). Identify the Left and Right adapter (stamped on the underside with either L or R). Left side = Left side when standing at the handlebar. Right side = Right side when standing at the handlebar.
BUMPER BAR Attaching Insert the tongue on the bumper bar into the housing on the seat until it clicks. Pull the bar to ensure it’s connection. Removing 2. Press the button underneath the bumper bar and pull out simultaneously. HANDLEBAR HEIGHT ADJUSTMENT Press the buttons on the outside of the handlebar and raise or lower as required.
Page 19
BUCKLE Locking the buckle Insert each tongue into the buckle until you hear a CLICK! 2. Repeat for each tongue x 4. Unlocking the buckle Press the button at the centre of the buckle.
Page 20
SHOULDER STRAP HEIGHT There are three height slot positions for the shoulder straps. As your child grows, you will need to move the straps according to your child’s height. The correct height is where the straps are about level or just above your child’s shoulders. The picture on the next page demonstrates the correct installation.
Page 21
TIGHTENING & LOOSENING STRAPS To tighten and loosen the harness, pull the straps through the toggle on the shoulder strap and/or the crotch strap as pictured. The straps should be firm but not too tight around your child. You should be able to fit two fingers in between the harness and your child.
Page 22
PARKING BRAKE & SWIVEL LOCK Parking brake: To engage the brake, depress the rear of the red brake pedal downwards. Give the stroller a small jiggle to ensure it engages. This brake locks both rear wheels. To release the brake, repeat by pressing the pedal downwards. Front wheel swivel lock: The swivel lock is located on the front wheel housing.
CARE & MAINTENANCE Important information • We recommend storing your stroller indoors to avoid corrosion. • We recommend regular inspection and maintenance of locking devices and security of essential components. Please follow our Servicing Guide (next page) • Regularly check all parts for wear and tear. •...
SERVICING GUIDE Just like your car, regular service extends the life of your Edwards & Co stroller. Below are some helpful tips to keep your wheels smooth and enjoyable to use. We recommend servicing your stroller at least every 6 months and an inspection at least once a month. Here’s how to service your stroller at home: Inspect all the rivets and To prevent the metal...
WARRANTY All Edwards & Co products are guaranteed for two years from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Edwards &...