Advertisement
Quick Links
Instruction
manual
oscar™ g3
Keep for future reference.
To reduce the risk of serious injury or death, read this owner's
manual prior to using this stroller.
Suitable for newborn babies up to children weighing 20 kg.
Independently safety tested by for compliance to the Australian and
New Zealand standard AS/NZS 2088:2013.
Advertisement
Related Manuals for Edwards & Co oscar g3
Summary of Contents for Edwards & Co oscar g3
- Page 1 Instruction manual oscar™ g3 Keep for future reference. To reduce the risk of serious injury or death, read this owner’s manual prior to using this stroller. Suitable for newborn babies up to children weighing 20 kg. Independently safety tested by for compliance to the Australian and New Zealand standard AS/NZS 2088:2013.
- Page 2 Introduction Hey there! Firstly, thanks for choosing Edwards & Co - we’re excited you’ve chosen oscar to discover the joy of motion with your little tyke! We have put a great deal of effort into ensuring that your buggy is safe and durable. Please take the time to carefully read this instruction manual in order to learn proper use and care tips.
- Page 3 GENERAL WARNINGS To greatly reduce the risk of injury or death, please read this owner’s manual before installing and using this buggy to ensure proper use. Buggy • NEVER LEAVE YOUR CHILD UNSUPERVISED IN THE BUGGY. • ALWAYS APPLY THE PARKING BRAKE WHEN YOU PARK THE BUGGY OR WHEN TAKING YOUR CHILD IN/OUT OF THE BUGGY.
- Page 4 GENERAL WARNINGS (cont.) Accessories • Use the safety strap located on the handle at all times. • When installing the seat unit, carry cot or capsule in the buggy, ensure the parking brake is engaged at all times. • It is unsafe to use accessories other than those supplied by Edwards &...
- Page 5 Stroller components In this manual we will help you with putting your oscar g3 together. The product should come with the following: Main components • buggy frame • seat unit • 3 pneumatic tyres (1 front + 2 back) •...
- Page 6 Wheel installation and removal Rear wheels: To install a wheel, press the release button on the wheel and simply insert the rod on the wheel hole located on each wheel strut until you hear a CLICK! To remove a wheel, press the button on the wheel hub cab and pull outwards.
- Page 7 Wheel installation and removal Front wheel: To install the wheel, insert the wheel rod into the frame hole as pictured until you hear a CLICK! NOTE- ensure the front wheel lock lever is disengaged beforehand so the wheel connects (see page 11). To remove the wheel, push the lever located at the top of the wheel and hold inwards (towards the buggy) as indicated by the arrow.
- Page 8 Unfolding and folding the stroller Unfolding: Stand the buggy upright (as pictured above left) or on the ground with the handle facing upwards (as pictured below). 2. Lift the black clip (as pictured above left) located on the right hand side of the frame away from the catch clip and pull the handle of the buggy upwards.
- Page 9 Seat unit installation and removal To install the seat unit, insert the locking adaptors into the frame and push downwards (do not press the release buttons when installing). WARNING – Ensure the seat unit is locked into the buggy frame before use.
- Page 10 Bumper bar installation and removal To install the bumper bar, insert the rods on each end of the bar CLICK! into the bumper bar retaining bracket until you hear a To remove the bar, press the release buttons located on the underside of the bumper bar retaining bracket (as pictured below).
- Page 11 Seat, leg rest and handle adjustment Seat recline: To adjust the recline, pull up the black plastic lever at the rear of the seat upwards and raise or lower the seat to the desired position (lie flat, reclined or seated). Leg rest height: To raise or lower the leg rest, press the two buttons on both sides of the leg rest hinge (as pictured below) until you hear it CLICK!
- Page 12 Useing the seat harness Securing the harness: Place your child in the seat. Make sure that your child’s back and bottom are flat against the seat. This will maximise comfort and allow the harness to properly secure your child. 2. Position the height of harness according to your child’s height. The harness straps should be level with their shoulders.
- Page 13 Parking brake and front wheel lock Parking brake: To engage the brake, push the red lever located on the right hand wheel strut downwards until you hear a click. Give the buggy a small jiggle to ensure it engages. This brake locks both rear wheels.
- Page 14 Caring for your stroller Important information • We recommend storing your buggy indoors to avoid corrosion. • We recommend regular inspection and maintenance of locking devices and security of essential components. • Regularly check all parts for wear and tear. Lubricate if tight with a silicone based product.
-
Page 15: Warranty Information
Warranty information All Edwards & Co products are guaranteed for two years from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Edwards &... - Page 16 edwardsandcobaby.com...