Table of Contents
Advertisement
Quick Links
Instruction
manual
Ed & Co™ Oscar 3-Wheeler
Keep for future reference.
To reduce the risk of serious injury or death, read this owner's
manual prior to using this stroller.
Suitable for infants up to 20 kg.
Independently safety certified to Australian and New Zealand
standard AS/NZS2088.
designed in NZ
Advertisement
Table of Contents
Related Manuals for Edwards & Co Oscar 3-Wheeler
Summary of Contents for Edwards & Co Oscar 3-Wheeler
- Page 1 Instruction manual Ed & Co™ Oscar 3-Wheeler Keep for future reference. To reduce the risk of serious injury or death, read this owner’s manual prior to using this stroller. Suitable for infants up to 20 kg. Independently safety certified to Australian and New Zealand standard AS/NZS2088.
- Page 2 Introduction Hey there! Firstly, thanks for choosing Edwards & Co - we’re excited you’ve chosen Oscar to discover the world with your littlie! We have put a great deal of effort into ensuring that your stroller is safe and durable. Please take the time to read this instruction manual carefully in order to get the most out of it from learning proper use and care tips.
-
Page 3: General Warnings
GENERAL WARNINGS To greatly reduce the risk of injury or death, please read this owner’s manual before installing and using this stroller to ensure proper use. Stroller • NEVER LEAVE YOUR CHILD UNSUPERVISED IN THE STROLLER. • ALWAYS APPLY THE PARKING BRAKE WHEN YOU PARK THE STROLLER OR WHEN TAKING YOUR CHILD IN/OUT OF STROLLER. - Page 4 GENERAL WARNINGS (cont.) Accessories • Use the safety strap located on the handle at all times. • When installing the seat unit, carry cot or capsule in the stroller, ensure the parking brake is engaged at all times. • It is unsafe to use accessories other than those supplied by Edwards &...
- Page 5 Stroller components In this manual we will help you with putting your bub’s new ride together. Your Oscar 3-wheeler should come with the following: Main components • Stroller frame • Seat unit • 3 pneumatic tyres (1 front + 2 back) •...
- Page 6 Wheel installation and removal Rear wheels: To install a wheel, simply insert the rod on the wheel hole located on CLICK! each wheel strut until you hear a To remove a wheel, push down the metal lever (as pictured below) and pull the wheel outwards simultaneously.
- Page 7 Wheel installation and removal Front wheel: To install the wheel, insert the wheel rod into the frame hole as CLICK! pictured until you hear a NOTE- ensure the front wheel lock lever is disengaged beforehand so the wheel connects (see page 11). To remove the wheel, push the lever located at the top of the wheel and hold inwards (towards the stroller) as indicated by the arrow.
- Page 8 Unfolding and folding the stroller Unfolding: Stand the stroller upright (as pictured above left) or on the ground with the handle facing upwards (as pictured below). 2. Lift the black clip (as pictured above left) located on the right hand side of the frame away from the catch clip and pull the handle of the stroller upwards.
- Page 9 Seat unit installation and removal To install the seat unit, insert the locking adaptors into the frame and push downwards (do not press the release buttons when installing). WARNING – Ensure the seat unit is locked into the stroller frame before use.
- Page 10 Bumper bar installation and removal To install the bumper bar, insert the rods on each end of the bar CLICK! into the bumper bar retaining bracket until you hear a To remove the bar, press the release buttons located on the underside of the bumper bar retaining bracket (as pictured below).
- Page 11 Seat, leg rest and handle adjustment Seat recline: To adjust the recline, pull up the black plastic lever at the rear of the seat upwards and raise or lower the seat to the desired position (lie flat, reclined or seated). Leg rest height: To raise or lower the leg rest, press the two buttons on both sides CLICK!
- Page 12 Securing and unlocking seat harness Securing harness: Place your child in the seat. Make sure that your child’s back and bottom are flat against the seat. This will maximise comfort and allow the harness to properly secure your child. 2. Position the height of harness according to your child’s height. The harness straps should be level with their shoulders.
- Page 13 Parking brake and front wheel lock Parking brake: To engage the brake, push the red lever located on the right hand wheel strut downwards. This brake locks both rear wheels. To release the brake, lift the lever upwards. Front wheel lock: The swivel lock is located at the top of the handle on the right hand side of the stroller.
- Page 14 Caring for your stroller Important information • We recommend storing your stroller indoors to avoid corrosion. • We recommend regular inspection and maintenance of locking devices and security of essential components. • Regularly check all parts for wear and tear. Lubricate if tight with a silicone based product.
-
Page 15: Warranty Information
Warranty information All Edwards & Co products are guaranteed for two years from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Edwards &... - Page 16 edwardsandcobaby.com...