TOC
Section 1: Getting Started
THANK YOU...
...for purchasing the Disc Laminator. This Laminator is the
perfect tool for creating water-resistant, scratchproof, smudge-
proof discs quickly and easily. The Disc Laminator even lets
you apply secure, holographic images directly onto the surface
of your discs. Operation is simple, quality is high, and printed
images take on a professional, screen-printed appearance.
To begin using the Laminator, please read this manual
carefully. This User's Manual is your complete step-by-step
guide to quickly and easily setting up and laminating with
your new Disc Laminator!
A. CHOOSING A GOOD LOCATION
Place the Laminator in a location with adequate air
•
circulation to prevent excessive internal heat build-up.
Do not place the Laminator near heat sources such as
•
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
Do not set items on top of the laminator. This could affect
•
the quality of the transfer.
Allow for adequate clearance in front of the printer to
•
accommodate the length of the unit with its CD Tray open.
B. UNPACKING AND INSPECTION
While unpacking your Laminator, inspect the carton to ensure
that no damage has occurred during shipping. Make sure that
all supplied accessories are included with your unit. The
following items should be included:
Disc Laminator
•
Power Adapter and Power Cord
•
Warranty Statement and Registration Card
•
Starter Roll of Lamination Film
•
Quick Start Guide and Other Printed Information
•
Save the carton and packing materials. They will come in
handy later if you ever need to transport the Laminator.
INDEX
Getting Started 1