4.5.3 Integrating devices in the Hama Smart Solu-
tion app
• The LED begins to flash blue quickly. If it flashes slowly or
not at all, press the Pairing button for 5 seconds.
• Open the app and log in.
• Press + in the upper-right corner to add a new device.
• Select Sensors in the list.
• Now confirm that the LED flashes quickly.
• Next enter your WiFi password and confirm with OK.
Your sensor will now be connected.
• Once the connection has been established, the LED stops
flashing quickly and the app confirms that your sensor
was connected. You can now give it a name.
• Click Finish to complete the process.
• You can now fit the sensor and then configure it.
4.6 WiFi camera
00176576 / 00176577
Status light
Reset
SD card slot
Microphone
Speaker
13