WLAN-enabled and connected to your home network running through the wall at the mounting site. • The Hama Smart Solution App, installed on your • Do not modify the product in any way. Doing so voids mobile device the warranty Children are not permitted to play with the device.
2.4 GHz network, you can add your smart product using the compatibility mode (Access Point mode). To do so, open the Hama Smart Solution app and click + at the top right. Next select the device you want to integrate, and, in the upper-right area, select ‘Otherwise’.
ON and OFF three times using the light switch. • Now open the Hama Smart Solution app and log in. • Press + in the upper-right corner (Pic 1) to add a new device.
Page 6
• . Pic 1 Pic 2 Pic 5 Pic 6 • Next enter your WiFi password and confirm with OK. • Your lamp will now be connected. Pic 7 Pic 3 Pic 4 • Once the connection has been established, the lamp stops flashing and the app confirms that your lamp was connected.
5 seconds. Risk of electric shock • Now open the Hama Smart Solution app and log in. Do not open the product. Do not continue to operate • Press + in the upper-right corner to add a new device.
• Press and hold the button on the front side for approx. 5 seconds until the blue LED begins to flash quickly. • Open the Hama Smart Solution app and log in. • Press + in the upper-right corner to add a new device.
• Next enter your WiFi password and confirm with OK. Battery compart- Pairing- • Your power socket will now be connected. ment closure button Manipulation protection 4.4.2 Mounting • We recommend attaching the sensor on the window or door frame and the device directly on the window or door. •...
• Open the app and log in. • Press + in the upper-right corner to add a new device. 4.4.3 Integrating devices in the Hama Smart Solu- • Select Sensors in the list. tion app •...
• Next enter your WiFi password and confirm with OK. • Your sensor will now be connected. 4.5 WiFi Motion Detector • Once the connection has been established, the LED stops 4.5.1 Product features flashing quickly and the app confirms that your sensor was connected.
4.5.2 Mounting Warning - Batteries Warning • When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. • Before mounting, check that the wall you have chosen Failure to do so could result in the batteries leaking or is suitable for the weight to be mounted.
4.5.3 Integrating devices in the Hama Smart Solu- tion app • The LED begins to flash blue quickly. If it flashes slowly or not at all, press the Pairing button for 5 seconds. • Open the app and log in.
• We cannot guarantee that residue will not be left on the mounting surface after the adhesive pad is removed. 4.6.1 Product features 4.6.3 Integrating devices into the Hama Smart • Status LED is constantly lit red: Preparing for pairing Solution app mode •...
Note - Pairing restart Press and hold the Reset button on the back for approximately 5 seconds until a signal tone sounds. As soon as the LED begins to flash red, you can make another pairing attempt. 4.7 WiFi controller for LED strips 4.7.1 Product features Note •...
5.2 1-click control and automation • The tasks for 1-click control and automation are set up in exactly the same way. Here, you can select between three • 1-click control is used to control multiple devices with possibilities for 1-click control, and four for automation. one click, or by voice command with an AI speaker.
(Pic 10) (If necessary, the app will now update.) Pic 11 Pic 12 • Now select Hama Smart Solution (Pic 11) in the list and log in with the data for your app. • Confirm with Link now (Pic 12), and in the next list confirm Hama Smart Solution once more (Pic 13).
Select the WiFi network that the device is to connect to. Enter the WiFi password and then click ‘OK’ to call up the network settings. Only 2.4 GHz WiFi is currently supported for the network integration. Check whether, in your case, the network is a 2.4 GHz network. The network connection is displayed after a few seconds.
Page 20
‘...’ button in the top-right corner to display further Open the app again. The device status should now update pages. Click ‘Feedback’ to specify the problem that in operation. has occurred and your router model. After the power supply of the lamp has been interrupted Using the app and then restored, the light that was originally switched off The app cannot remotely control the device;...
Page 21
Note WiFi Touch Wall Switch 176551 Subject to changes in the course of further technical Input voltage 230 V / 50 Hz development. Output voltage 230 V / 50 Hz 9. Technical Data Maximum connected load 1000 W WiFi-LED Light 176547 Frequency band / 2,4 GHz...
Page 22
WiFi Upgrade Switch Frequency band / 176556 2,4 GHz for Lights and Sockets frequency bands Input voltage 230 V ~, 50 Hz Maximum emitted 0,08 W transmitting power Maximum connected load 2300 W Frequency band 2,4 GHz Outdoor WiFi socket 176570 Maximum emitted Input/output voltage...
Page 23
WiFi Lights 176584 Frequency band / 2,4 GHz frequency bands Light output 806 lm Maximum emitted Output 10 W < 100 mW transmitting power 2700 K – 6500 K Light colour WiFi Siren 176590 (warm white to cold white) Frequency band 2,4 GHz Lamp Current 87 mA...
-> 00176558 -> Downloads 11. Warranty Disclaimer www.hama.com -> 00176559 -> Downloads Hama GmbH & Co KG assumes no liability and provides no www.hama.com -> 00176565 -> Downloads warranty for damage resulting from improper installation/ www.hama.com -> 00176566 -> Downloads mounting, improper use of the product or from failure to www.hama.com ->...
Page 25
Hama GmbH & Co KG 86652 Monheim / Germany Service & Support www.hama.com +49 9091 502-0 All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Need help?
Do you have a question about the 00176547 and is the answer not in the manual?
Questions and answers