Using Your Machine - Vax SteamFresh REACH Manual

IMPORTANT: Always test on an inconspicuous area of flooring first before using detergent. Don't over fill the clean twin
tanks or exceed the maximum amount required. Don't use the steamer without water in the water tank. Always top up
with water in good time.
CAUTION: This steamer is not free standing, when filling or carrying out any maintenance always stand securely against
a wall/fixed structure or lie the steamer flat on the floor in a suitable location so it does not become a trip hazard or can
be stepped on.
Filling the twin tank
Press the twin tank
release button down,
grip the twin tank
and pull to remove.
Grip the twin tank and pull
the tab on the detergent tank
cap to open.
Line up the lip on the base
of twin tank with the main
body. Push in a hinge like
manner to click into place.
Grip the twin tank and
pull the tab on the water
tank cap to open.
Fill the detergent tank
up to the fill line with
water and top up with
detergent replace the cap
and push firmly to close.
Important : If the twin
tank is not fitted correctly
there will be a reduction
in the amount of steam/
detergent produced.

Using your machine

Fill the water tank with
water. Replace the cap
and push firmly to close.
Before replacing the twin
tank make sure the hard
water filter is in place.