Usage And Connections; Hardware Installation; Strato Pi Base Board - Sferalabs SPMB21X User Manual

Usage and connections

STRATO PI BASE CONNECTION DIAGRAM

Hardware Installation

Strato Pi Base board

The Strato Pi Base board is supplied with all connectors pre-installed. No soldering is
required. You should connect Strato Pi to Raspberry Pi through the GPIO connector. Use
appropriate turrets/spacers to firmly bolt the two boards together, ensuring that no
conductive part of one board touches any part of the other board.
Be particularly careful to ensure there is enough clearance between the Ethernet and USB
connectors and the bottom of Strato Pi's circuit board.
NOTICE
The GPIO connector of the Strato Pi Base board must be perfectly aligned to the
Raspberry Pi's GPIO pins. Turning on the Raspberry Pi and/or the Strato Pi Base board
with the GPIO not correctly connected will damage both the Raspberry Pi and Strato Pi
Base.
9 Strato Pi Base User Guide