Wilo -Drain TMW 32 Installation And Operating Instructions Manual
Hide thumbs
Also See for Wilo-Drain TMW 32:
- Installation and operating instructions manual (96 pages) ,
- Installation and operating instructions manual (17 pages) ,
- Installation and operating instructions manual (80 pages)
Related Manuals for Wilo Wilo-Drain TMW 32
Summary of Contents for Wilo Wilo-Drain TMW 32
- Page 1 Pioneering for You Wilo-Drain TM/TMW/TMR 32 en Installation and operating instructions · 2036885 • Ed.10/2023-04 EU1...
- Page 2 Drain TM/TMW/TMR 32 https://qr.wilo.com/701...
-
Page 3: Table Of Contents
9 Maintenance................ 12 General overhaul .............. 12 10 Faults, causes and remedies............ 12 11 Spare parts ................ 13 12 Disposal .................. 13 12.1 Information on the collection of used electrical and elec- tronic products .............. 13 Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 4: Safety
The aforementioned branded products consti- potentially irreparable property damage. tute non-binding suggestions. Similar products • NOTICE! from other brands can also be used. WILO SE Useful information on handling the product Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 5: Transport And Storage
Product without plug: Electrical connection turer's instructions! must be carried out by a qualified electrician! Wear protective equipment according to – the manufacturer's instructions! If in doubt, ask your specialist dealer. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 6: 1.12 Operating Fluid
(jacket cooling) with integrated operating capacitor and self- switching thermal motor monitoring. Motor housing and shaft made of high-quality stainless steel (AISI 316L). Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 7: Technical Data
In accordance with ISO 8601 – Rainwater 2.5 min operation/7.5 min standby – Drainage water Also applies to pumps with a 30 m (98 ft) connection cable. • Fluid temperature: 3 ... +40 °C (37 ... 104 °F), max. 90 °C (194 °F) for 3 minutes Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 8: Improper Use
Seal pipe connections with Teflon tape. • Install all specified valves in accordance with local requirements (gate valve, non-return valve). • Install the pressure pipe so that it is protected from frost. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 9: Electrical Connection
• A multiple plug socket or power strip is in use Secure the connection cable to the pressure pipe and route it to the socket. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 10: Commissioning
Blue (bl) N (neutral conductor) be simulated using another water source. Green/yellow (gn-ye) Earth (protective earth con- When the switch-on level is reached: pump starts. ductor) Switch-off level reached: pump stops. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 11: Drain Tmr Flat Suction
Allow water to flow through the discharge port to clean the • Depending on the operating mode and duration, the housing jacket cooling channel. parts become hotter than 40 °C (104 °F). – Only touch the product by the carrying handle. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 12: Removing And Cleaning The Strainer
Remove any kinks in the pressure hose. Turn the pump and fully screw in the 4 fastening screws Suction port/strainer silted/clogged (Ø 3,5x14 mm). NOTICE! Replace worn screws! ⇒ Shut down the pump, remove it and clean it. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... -
Page 13: Spare Parts
Please consult your local municipality, the nearest waste disposal site, or the dealer who sold the product to you for information on proper disposal. See www.wilo‑recycling.com for more information about recycling. Installation and operating instructions • Wilo-Drain TM/TMW/TMR 32 • Ed.10/2023-04... - Page 16 Local contact at www.wilo.com/contact WILO SE Wilopark 1 44263 Dortmund Germany T +49 (0)231 4102-0 T +49 (0)231 4102-7363 wilo@wilo.com Pioneering for You www.wilo.com...
Need help?
Do you have a question about the Wilo-Drain TMW 32 and is the answer not in the manual?
Questions and answers