Table of Contents
Advertisement
Speakers
Table 5-3
Speaker spare part information
Description
Speakers (include left and right speakers, cables, and 2 rubber isolators)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Remove the speakers:
1.
Release the shielding (1) that covers the battery cable and connector.
2.
Disconnect the battery cable (2) from the system board.
3.
Disconnect the speaker cable (1) from the system board.
4.
Release the speaker cable from the routing clips (2) and channel built into the battery.
5.
Remove the three Phillips M2.0×4.2 screws (3) that secure the speakers to the bottom cover.
Keyboard/top cover on page
Spare part number
L89788-001
24).
Component replacement procedures
31
Advertisement
Table of Contents
