Table of Contents
Advertisement
Display assembly
NOTE:
The display assembly is available as spare parts at the subcomponent level only. See the removal
section for each component for information.
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery from the system board (see
Remove the display assembly:
1.
Remove the display hinge cover by following these steps:
a.
Close the computer.
b.
Turn the computer upside down with the front toward you.
c.
Use a case utility tool (1) or similar thin, plastic tool to separate the left (2) and right edges of
the hinge cover from the display assembly.
d.
Remove the hinge cover (3).
The hinge cover is available using spare part numbers L89769-001 (in chalkboard gray finish) and
L89770-001 (in dark sage gray finish).
2.
Remove the display bezel by following these steps:
44
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
24).
32).
Advertisement
Table of Contents
