If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
Safety and Warranty water or other liquids. 5. Unplug this unit when not in use and before cleaning. 6. Allow the unit to cool before putting on or taking off parts. 7. Do not operate this or any appliance with a damaged electrical cord or plug. 8.
Page 6
1 YEAR PARTS AND LABOUR BENCH WARRANTY Within the warranty period, contact Omcan Inc. At 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.
Safety and Warranty Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info. WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.
Operation Using a small amount of detergent, wash the handle and food racks with soapy water. (NOTE: Do not use a spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth. While washing this unit, do not to touch the electric heating element and fan. Do not soak the inside of the dehydrator with water. After washing and thoroughly drying the surfaces noted above, place the food racks back inside the dehydrator.
Page 9
Operation off. When the set dehydrating time has been reached, the unit will chime and the heating elements will automatically shut off. TEMPERATURE CONTROL KNOB The temperature range of this unit is 85-160 degrees Fahrenheit on 120V models. This thermostatic switch controls the temperature inside the dehydrator and helps to maintain the proper temperature during various dehydrating applications.
Page 10
Operation MAKING JERKY • Use the best quality meats. Meats, fish and poultry should be lean and fresh. Remove as much fat as possible before dehydrating. Using lean meat will help the meat dry faster and aid in cleanup by decreasing the drippings.
Operation RE-HYDRATING FOODS WARNING! DO NOT soak food at room temperature. Soaking at room temperature allows harmful bacteria to grow. Follow the “Food Safety” guidelines outlined in this manual. • Dehydrated food can be re-hydrated by soaking in cold water for 3-5 minutes or for 2-6 hours in the refrigerator in water.
Troubleshooting Problem Solution The dehydrator does not work after being switched Make sure dehydrator is plugged in. Be sure that the timer is set. Be sure that the temperature control knob is set. There is a metallic sound when the dehydrator is in Do not attempt to dismantle the dehydrator.
Parts Breakdown Model CE-CN-0010-D 43222 Model CE-CN-0016-D 47042...
Page 14
Timer and Thermostat Knob for 43222 22, 23 for 43222 61901 Right Rack Assembly for 43222 61909 Quarries Net for 43222 61902 Timer for 43222 61910 Front Panel for 43222 Model CE-CN-0016-D 47042 Item No. Description Position Item No. Description Position Item No. Description Position...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 20
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the CE-CN-0016-D and is the answer not in the manual?
Questions and answers