Honda GROM125/A 2020 Manual page 89

Adjust the drive chain slack.
3.
Install and tighten the rear axle nut.
4.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
After installing the wheel, apply the brake
5.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
P. 69
2
Tire Puncture Removing Wheels
u
87