Honda GROM125/A 2020 Manual page 64

Engine Oil Changing Engine Oil
u
Place a drain pan under the drain bolt.
4.
Remove the oil fill cap/dipstick, drain bolt
5.
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling center.
62
Sealing washer
Drain bolt
Install a new sealing washer onto the
6.
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
Fill the crankcase with the recommended
7.
oil ( P. 48, P. 116) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil:
1.0 US qt (0.9 L)
Check the oil level.
8.
Check that there are no oil leaks.
9.
P. 60
2