WAGNER CLICK&PAINT W 687 E Operating Instructions Manual page 26

GB
Weight
1) Air cap
3) Union nut
5) Trigger guard
7) Gun handle
9) Carry handle
11) Air hose
13) Cover of air filter compartment
15) Gun holder
17) Valve
19) Carrying belt
21) Stirring rod
23) Replacement nozzle seal (3 pcs.)
25) Operatimg instructions
Field of application
Many different coating substances can be processed with the W687 E.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Materials with a flash point below 21°C.
20
Technical Data
approx. 3.0 kg
Description (Figs. 1)
2) Tip
4) Perfect Spray spray attachment
6) Material volume regulation
8) ON/OFF switch
10) Air volume control
12) Power cable
14) Air filter
16) Container (800 ml)
18) Ventilating hose
20) WallPerfect spray attachment
22) Feed hopper (2 pcs.)
24) Practice poster
26) Lubricating grease (without illustration)
Spray attachment
Perfect Spray (anthracite)
WallPerfect (white)
W 687 E