Philips S7882/51 Manual page 60

English
1
2
4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining rings.
Each retaining ring has two recesses that fit
-
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
7 Insert the hinge of the shaving head holder into
the slot in the top of the shaving unit and close
the shaving unit.
59