Before You - Life Fitness LIFECYCLE INTEGRITY+ Series Assembly Instructions Manual

Before You Begin
The monocolumn is positioned with the back of the console support weldment laying on the bike seat. The seat is set
to the lowest position.
1. Remove and discard the metal bracket that holds the monocolumn to the base. Use a 13mm socket to remove the
two M8 screws, two plastic washers and two M8 hex lock nuts that secure the monocolumn to the bracket. Use the
13mm socket wrench to also remove the M8 hex lock nuts that holds the metal bracket onto the base.
NOTE: Discard the two M8 screws and two plastic washers. Retain all four nuts for reuse.
2. Grab the handlebars. Lift the moncoloumn up and turn COUNTERCLOCKWISE.
NOTE: DO NOT turn the monocolumn clockwise! Cables may become twisted as a result.
Item
1
2
3
4
Page 13 of 23
Description
Metal Bracket
Discard
M8 Hex Lock Nut
M8 Screw Discard
Plastic Washer
Discard
Qty.
1
4
2
2