Product Description; Functions; Safety Instructions - Noaton DF 4112 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11

Product description

A compressor dehumidifier is a device used to remove moisture from the air by condensation.
Compressor dehumidifiers are ideal for use in areas with high humidity, such as basements, garages or storage areas. These dehumidifiers
can significantly reduce humidity, which can improve air quality and reduce the risk of mold and other microorganisms.

Functions

POWER - Press this button to turn the unit on or off.
SPEED - Press the button to select high speed (HI) or low speed (LOW).
TIMER
Press the button to set the desired time. (1 to 24 hours)
When the timer is set in standby mode, the unit will automatically turn on; when the timer is set in operating mode, the unit will
automatically turn off.
If you press the power button to turn off the unit before the timer finishes counting down, the timer setting will be cancelled.
The indicator light will illuminate while the timer is in use.
After setting the timer, the display can switch back to the ambient humidity display.
HUMIDITY SETTING
This button can be used to select the desired humidity, the setting range is 30-90% (setting coefficient 5%). CO - Continuous
dehumidification, AU - Comfort mode (see below)
When the ambient humidity is 3% below the set humidity, the compressor will automatically stop and return to operation until
the ambient humidity is 3% above the set humidity.
Comfort mode (AU)
If the ambient temperature is below 5℃, the compressor will stop working.
When the ambient temperature is above 5℃ and below 20℃, the product will automatically set the humidity to 60%.
When the ambient temperature is above 20℃ and below 27℃, the product will automatically set the humidity to 55%.
If the ambient temperature is higher than 27℃, the product will automatically set the humidity to 50%.
TANK FULL - When the water tank is full, the indicator light will come on and the machine will stop working until the water tank is empty.
DEFROST - When defrosting the unit, the indicator light will come on and the compressor will stop working, but the engine will remain
running.

Safety instructions

Read the operating instructions carefully before use.
Do not use the device near flammable or explosive substances.
Do not use the device near water or other liquids.
Do not use the device if it is damaged or appears to be malfunctioning.
Do not use the device with a damaged cable or plug.
1.
Display
2.
Air outlet
3.
Handle
4.
Cover
5.
Hose opening
6.
Tank
13
EN

Advertisement

Table of Contents
loading

Table of Contents