Access Point Installation - Aruba 610 Series Installation Manual

Natural Items—Fish tanks, water fountains, ponds, and trees

Brick

RF reflectors include:
Metal Objects—Metal pans between floors, rebar, fire doors, air conditioning/heating ducts, mesh windows, blinds,

chain link fences (depending on aperture size), refrigerators, racks, shelves, and filing cabinets.
Do not place an access point between two air conditioning/heating ducts. Make sure that access points are placed

below ducts to avoid RF disturbances.
RF interference sources include:
Microwave ovens and other 2.4 or 5 GHz objects (such as cordless phones)

Cordless headset such as those used in call centers or lunch rooms

RF Radiation Exposure Statement: This equipment complies with RF radiation exposure limits. This equipment
should be installed and operated with a minimum distance of 7.87 inches (20cm) between the radiator and your
body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
!
Déclaration sur les limites d'exposition aux radiofréquences : cet équipement est conforme aux limites
d'exposition aux rayonnements radioélectriques spécifiées. Il doit être installé et utilisé à une distance minimale
de 35 cm par rapport à votre corps pour les fréquences de 2,4 et 5 GHz. Cet émetteur-récepteur ne doit pas être
utilisé ou situé à proximité d'autres antennes ou émetteurs-récepteurs.
!
Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the
access point. Otherwise, degradation of the performance of this equipment could result.

Access Point Installation

All Aruba access points should be professionally installed by an Aruba-Certified Mobility Professional (ACMP).
The installer is responsible for ensuring that grounding is available and meets applicable national and electrical
codes. Failure to properly install this product may result in physical injury and/or damage to property.
!
Tous les points d'accès Alcatel-Lucent Enterprise doivent impérativement être installés par un professionnel
agréé. Ce dernier doit s'assurer que l'appareil est mis à la terre et que le circuit de mise à la terre est conforme
aux codes électriques nationaux en vigueur. Le fait de ne pas installer correctement ce produit peut entraîner
des blessures corporelles et / ou des dommages matériels.
!
For indoor use only. The access point, AC adapter, and all connected cables are not to be installed outdoors. This
stationary device is intended for stationary use in partly temperature controlled weather-protected
environments (class 3.2 per ETSI 300 019).
6
Aruba 610 Series Campus Access Points | Installation Guide