Table of Contents
Advertisement
PICTURE MENU
CUSTOM
TILE MATRIX*
2
H MONITORS
V MONITORS
POSITION
TILE COMP
CONFIRM SETTINGS
RESET
*
: The function is available only when connecting the optional sensor unit.
1
*
: Except for Media Player.
2
*
3
: YPbPr signal only.
*
4
: Except for VGA(RGB).
AUDIO
AUDIO MENU
AUDIO MODE
NATIVE
RETAIL
CONFERENCING
HIGHBRIGHT
TRANSPORTATION
CUSTOM
VOLUME
BALANCE
STEREO/MONO
BALANCE
SURROUND
The monitor's input signal, backlight and volume levels automatically shift to the setting at [INPUT
SELECT], [BACKLIGHT] and [VOLUME] when no human presence is detected during the period set at
[WAITING TIME].
When a person is near the monitor again, the monitor will automatically return the backlight and volume to
normal levels and reproduce the input signal selected for [INPUT SELECT].
NOTE:
[VGA(RGB)] cannot be selected for [INPUT SELECT].
Allows one image to be expanded and shown over multiple screens (up to 100) through a distribution
amplifier. This option is for configuring the TILE MATRIX settings.
NOTE:
•
Low resolution is not suitable for tiling to a large number of monitors.
•
You can operate without a distribution amplifier at a lower number of screens.
•
If [ZOOM] is selected in [ASPECT], the setting changes to [FULL] when the tile matrix is
activated. When the tile matrix is deactivated, the [ASPECT] setting shifts back to [ZOOM].
•
While the tile matrix is active, changing the aspect setting to [ZOOM] or changing the zoom
level does not affect the picture.
When the tile matrix deactivates, any settings that changed while the tile matrix was active are
immediately applied.
•
If Media Player contents are played while [TILE MATRIX] is active, the image play timing might
have a gap within monitors.
Number of monitors arranged horizontally.
Number of monitors arranged vertically.
Select the section of the tiled image to view on the current monitor.
Adjusts the image to compensate for the gap between monitors.
When activated, the image size and position can be adjusted by pressing the + or – button on the remote
control.
Starts the Tile Matrix.
Resets all picture menu settings back to factory settings except for [PICTURE MODE].
Provides pre-configured audio settings suitable for various environments where this device may be used,
or customize settings to viewer preference.
Standard setting.
Surround sound for clarity of audio in retail stores.
Optimized settings for clarity of audio in conference rooms.
Lowest volume level in order to focus on the visual message (audio is mute).
Lowest volume level in order to avoid disturbance in public spaces (audio is mute).
Customizable settings.
Increase or decrease output volume level.
Select [STEREO] or [MONO] for the audio output.
STEREO: Independent audio channels for routing audio signal. Sound balance between the left and right
speakers can be adjusted.
MONO: Audio signals are routed through a single audio channel. Balance cannot be adjusted and the
slider will be unavailable.
Press the + button to move the audio signal to the right.
Press the – button to move the audio signal to the left.
NOTE:
This function is not available when [MONO] is selected.
Artificially produces surround sound audio.
English−77
Advertisement
Table of Contents
