Eco Solution; Brightness Limit; Energy Saving Mode; Eco Sensor - Samsung QHR Series User Manual

Eco Solution

MENU m → System → Eco Solution → ENTER E
Eco Solution

Brightness Limit

Energy Saving Mode

Eco Sensor

Minimum Backlight
Screen Lamp Schedule
No Signal Power Off
Auto Power Off Off (Recommended)
" The displayed image may differ depending on the model.
On
Off
Off
0
Off
15 minutes
Brightness Limit
Turn the Brightness Limit on or off. If you select On, the display won't have the maximum brightness, but you will
save energy.
• Off / On
" This function may not be supported depending on the model.
Energy Saving Mode
Reduce the power consumption by adjusting the screen brightness.
• Off / Low / Medium / High or Off (
Eco Sensor
Automatically adjust the picture brightness based on the ambient light level.
• Off / On
" If the screen contrast is not sufficient, set the
energy standards.
" This function may not be supported depending on the model.
Minimum Backlight
Set the minimum brightness for the signage screen. This function only works if its value is lower than the value set
in the Picture menu's Backlight setting.
" If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
" Available only when Eco Sensor is set to On.
" This function may not be supported depending on the model.
) / On ( )
Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with
89