Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter MX 5025 Operator's Manual

– Wait for all moving parts to stop.
•
Do not operate the machine when there is the risk of
lightning.
•
Do not use the machine as a towing vehicle.
•
Do not change the governor speed or overspeed the
engine.
•
Use accessories and attachments approved by Toro only.
Slope Safety
•
Slow down the machine and use extra care on hillsides.
Travel up and down on hillsides. Turf conditions can
affect the stability of the machine.
•
Avoid turning the machine on slopes. If you must turn the
machine, turn it slowly and gradually downhill, if possible.
•
Do not turn the machine sharply. Use care when reversing
the machine.
•
Use extra care while operating the machine with
attachments; they can affect the stability of the machine.
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the mower
blades and any powered attachments.
Engaging the Blade-Control Switch
(PTO)
Note: Always engage the blades with the throttle in the F
position (Figure 13).
Disengaging the Blade-Control Switch
(PTO)
17
G008945
Figure 12
Figure 13
G009174
Figure 14
g008945
AST
g187516
g009174