Yoshimura 15002B0520 Manual

Yoshimura 15002B0520 Manual

For bmw r1200gs/r1250gs 2013-2022

Advertisement

5420 DANIELS STREET STE A, CHINO CA., 91710 · (800) 634-9166 · (909) 628-4722 · FAX (909) 591-2198
BMW R1200GS/R1250GS
Stainless Steel R-77 Slip-On
All Street Series systems are:
• Slip-on/Bolt-on applications that do not require tampering with the vehicle's emissions control system.
• CARB/EPA tail-pipe emissions compliant.
• Marked with appropriate EPA noise labels.
• Not tested for EPA new vehicle noise compliance.
You must know how to remove and replace your stock exhaust in order to install this product
otherwise have it installed by a professional mechanic. Keep all stock parts from your existing
system as some components may be necessary to install your new Yoshimura exhaust depending
on the application. Read through all instructions before beginning installation. Exhaust system can
be extremely hot. Let motorcycle cool down before beginning installation. Always wear hand and
eye protection and take precautionary measures to avoid injury.
NOTE: IN THE STATE OF CALIFORNIA, IT IS ILLEGAL TO MODIFY THE EMISSION CONTROL SYSTEM, WHICH INCLUDES THE CARBURETORS OF ANY VEHICLE.
RESEARCH&DEVELOPMENT OF AMERICA, INC.
www.yoshimura-rd.com
Street Series
Qualified Manufacturer Declared "Replacement Part "
2013 ~ 2022
15002B0520
(SS/CF)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15002B0520 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Yoshimura 15002B0520

  • Page 1 Keep all stock parts from your existing system as some components may be necessary to install your new Yoshimura exhaust depending on the application. Read through all instructions before beginning installation. Exhaust system can be extremely hot.
  • Page 2: Assembly Diagram

    8mm x 20mm Flanged Hex Head M8X16 8mm x 16mm Socket Head Cap Bolt RC116HSB 6mm x 8mm Heatshield Screw 8MMNUT 8mm Flange Nut RACE-SPS-1 Medium Exhaust Spring ST-200 Spring Puller Tool 17100 Yoshimura Sticker Kit Sheet Not shown in diagram.
  • Page 3: Installation

    Trim excess heat insulator band. bracket. 5. Slide (No. 3) 1121-MPCAX, onto (No. 2) 3. Loosen the stock exhaust clamp between 15002B0520-RMA, muffler and install muffler inlet header and muffler/tailpipe. onto (No. 1) 15002-435D, tailpipe outlet. 4. While securely supporting the stock muffler 6.
  • Page 4 If problem still persists, please call Clean using a soft cloth and soap. Do not use Yoshimura Tech Department at (800) 634-9166 / abrasive materials as it will scratch the surface. in CA (909) 628-4722.
  • Page 5: Exhaust System Maintenance

    Dear Yoshimura Customer, Congratulations and thank you for purchasing a Yoshimura Exhaust System. Over six decades of experience in research and development, state of the art machinery, materials and craftsmanship of the highest quality all come together in a product of exceptional quality and performance—in other words, this is the best thing you can put on your bike.
  • Page 6 When you are performing periodic maintenance on your vehicle (like a tire change, or an oil change) you can remove your Yoshimura muffler from the vehicle and weigh it again.
  • Page 7 (found on header and tail-pipe components). 6. Also, feel free to ask through online e-mail at sales@yoshimura-rd.com, or fax your question/problems to (909) 591- 2198. To obtain technical information directly from Yoshimura, call (909) 628-4722.

This manual is also suitable for:

Street series

Table of Contents