Polycom iPower 9000 Getting Started Manual page 9

2. Enter the number (for example, 19875554321) or
the LAN address (for example, 103.32.24.5) of the
system you want to call.
3. Enter any additional information needed for the
call:
If you need to enter a second ISDN number, check
Use two ISDN numbers and then enter the second
number in the field that appears.
Note: Use two ISDN numbers only when the party
you're calling has instructed you to do so. Entering a
second number sets the call to 2x64 kbps even if
your system is capable of higher bandwidth calls.
If you want to make a voice-only (non-video) call,
check Make this a voice-only call.
Note: If the site you're calling has both an ISDN
number and a LAN address, use the ISDN number for
voice-only calls.
If you need to enter a far-end gateway extension,
click Advanced, enter the extension in the Far-end
gateway extension field, and then click OK.
4. Click Call Now.
G S G
ETTING TARTED UIDE
8