Battery Disposal - Magnat Audio SOUNDDECK 100 Important Notes For Installation & Warranty Card

The triangle with a lightning symbol warns the user that high voltage is used within the device which can result in
electric shock.
The triangle with an exclamation mark informs the user that important operating and maintenance instructions
(repair) are contained in the accompanying instruction manual, which must be observed.
INSTRUCTIONS FOR DISPOSAL
In accordance with European Directive 2002/96/EC all electrical and electronic appliances must be disposed of separately via local
collection points. Please observe the local regulations and do not dispose of your old appliances with normal household waste.

BATTERY DISPOSAL

Old batteries are hazardous waste and must be disposed of in accordance with current regulations.
CONTENTS
(A) 1 pc. Sound deck
(B) 1 pc. Remote control including battery (button cell CR2025H)
(C) 1 m Stereo audio cable, RCA jack on both sides
(D) 1 pc. Optical digital cable
(E) 1 pc. Mains cable
(F) 1 pc. Instruction manual
UNPACKING THE SPEAKER
Please unpack the speaker and accessories carefully and check the contents of the box using the list above. In the event of any
transport damage, please contact your supplier. Keep the packing material in a safe location. The original packaging enables
trouble-free transportation for any subsequent relocation and servicing requirements.
SETTING UP THE SPEAKER
The sound deck should be positioned directly under the centre of the screen. The housing of the sound deck is designed to
withstand the weight of a small to medium-sized TV or computer monitor without any problems. If the monitor is located on
a shelf or sideboard, the sound deck can be set up directly underneath. If the TV is mounted on a wall, the sound deck should
be positioned directly in front of, and below, the set. A solid, level surface is important to ensure proper functionality of the
subwoofer chassis, which is located at the bottom of the sound deck.
SYSTEM INSTALLATION (FIG. 2)
Connecting a TV to audio input LINE IN 2:
Use the supplied audio cable (C) and connect the audio output on your TV to audio input LINE IN 2 (3). If your TV has an audio
output with fixed level, this is preferable to the audio output with variable level.
Do not open! Risk of electric shock!
CAUTION: In order to avoid electric shock do not open the speaker housing/mains adapters or
remove the covers. The user is not to conduct any repairs him/herself. Repairs should only be
conducted by qualified technicians! Do not use any sockets or extension cables that do not fully
accommodate the plug of the device.
10