Page 1
PORTABLE POWER STATION E1000/E1500 User manual Please read the manual carefully before you use! Please keep the manual carefully so that you can check it for usage in the future. And please read the manual carefully to avoid unnecessary damage of the portable power station.
Page 2
Please read the following information before you use the power unit. To ensure the safety of use and avoid damage to the power pack, please first read the Safety Precautions (pages 1-3) and the Handling Precautions (page 3-5). Please also read this manual carefully to ensure proper use of the portable power station.
Page 3
▇ This printed manual is a basic instruction manual. ▇ This manual only applies to portable power station of E1000/E1500. ▇ Due to product improvement and upgrading, the contents of product specifications and manuals may be changed without notice.
Page 4
Editing routine in the manual (Page **):Reference page for more information :warnings about problems with the power supply :Additional information :Tips or advice for better use of the portable power station :Suggestions for troubleshooting...
Content .............. Safety Precautions Handling Precautions (Reserve and Use of Equipment ................. Correctly) ..............List of the product ............Product introduction ............Product specifications ......Introduction of the parts and functions ......Operation instructions and precautions ........... How to charge the battery ............
Safety Precautions To protect yourself and others from harm and to protect your equipment from damage, please read all the following information carefully before using your equipment. Warnings: 1.Do not put the battery in the fire or heat the power and do not store the power in high temperature environment.
Page 7
6.Make sure that the heat dissipation is at least 5cm around the power supply. 7.Do not disassemble, modify or repair the power supply. Any changes or modifications made to the equipment will not be warranted by the manufacturer. For repairs, please contact the dealer where you purchased the product.
• Extreme temperatures can damage the device, reduce its charging capacity, and shorten the life of the power supply. • Do not use a damaged charger. Handling Precautions (Custody and Use of Equipment Correctly) Keep the power supply dry • Moisture and liquids can damage equipment components or circuits。...
Page 9
be in a dangerous state because the internal temperature of the vehicle can reach as high as 80°C during the summer. • Do not expose the power supply to direct sunlight for long periods of time, such as on the dashboard of a car. •...
Page 10
100% for the battery capacity, but the actual battery power will be less than 100% due to self-consumption of the battery, and the long-term loss of the control panel ) • When the charger is not in use, please disconnect the power.
Charging adapter Charging cable 4 in 1 DC output cable Packing list Quantity E1000/E1500 portable power station Charging adapter Charging cable 4 in 1 DC output cable Car charger(optional) Manual and warranty card Accessories Bag...
The following examples illustrate the power and standby time of some common appliances E1000/E1500 Supply power to other appliances by : Smart Phone (8-10Wh) : charging for more than 109/160 times Tablet(16-25Wh) : charging for more than 55/80 times...
Product parameters Model E1000 E1500 Rated output power 1000W 1500W Peak power 2000W 3000W AC pure-sine wave AC110V60Hz Output voltage DC 12V10A USB 5V2A(QC3.0) Battery type Lithium-ion battery Battery capacity 1028.16Wh 1512Wh (25.2V40.8Ah) (25.2V60Ah) Life circle 70%@1000cycle Charging time 5~6H...
Introduction of the parts and its functions Front Panel Back Panel...
Page 15
Description Charging DC 16MF four-pins aviation power socket: (1, 2 is positive, 3, 4 is negative): When the power supply needs to be charged, it can be docked with 16MF four-core aviation plug (IN 29.4-40V10A) DC output 16MF two-core aviation power socket: (1 is positive, 2 is negative): When the DC switch is open, DC power can be supplied (12V10A) USB ports*2 : supply power to electrical appliances...
Operation instructions and precautions ▇ Charge the power unit before using it To ensure safe transportation of the E1000/E1500 power supply, when you just get the power unit. it is not fully charged or it is in a low battery state, so please charge the power unit before using it.
How to charge the power unit At this stage, we can charge the battery in the following ways: 1. Use our power adapter to charge. When charging, we need to plug the end of the power cord into the socket at the end of the adapter.
Page 18
Car cigar port 2.Charge the battery with solar panel . In this case, it is only necessary to connect one end of the connection cable to the solar panel and the other end to the power charging interface. Then solar charging is working.(maximum voltage of solar panels not more than 40V, minimum voltage not less than 29.4V)
How to use AC output Please note the following before using it: 1.The input voltage and frequency of the appliance must be the same as that of the power. 2.Please ensure that the rated c of the appliance is less than the rated power of the power supply, preferably within 80% of the rated power.
Page 20
Step 3 : Check the load power and ensure it’s not higher than the rated power of E1000/E1500 Step 4 : Plug in the AC socket of E1000/E1500 and turn on the load switch. AC OUT Step 5 : Turn off the AC output switch after using it.
Step 6 : Please charge E1000/E1500 on time if the battery is run off or lack of battery so that you can use it conveniently next time! (Note : Please be sure to turn off the switch of AC power when you don't need to use it. Or it will be in high...
Misuse and countermeasures Error Root solution No display after Interior battery Charge up pressing any switch power out Disconnect the load and start to work it Over-temperature after the temperature No AC output is lowered after pressing Check the loading the AC switch Over-load power and decrease it...
Warranty The warranty of E1000/E1500 is within 12 months after you buy the product; During the warranty period, our company will be responsible for the defects on material and process, we will change the damaged parts after receiving them back or maintain the product for free once our technicians inspect that the breakdown occurs normally;...
Page 24
Our company reserves the right to add or delete any maintenance and warranty terms without notice. The company does not assume any responsibility for any damage to your equipment caused by incorrect use of the company's products. For compatibility of this product with your device, please confirm it with dealer at the time of purchase.
Statement for poisonous and harmful substance of the power unit Poisonous and harmful material and elementd Parts (pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE) Structuralpa parts × ○ ○ ○ ○ ○ Circuit board × ○ ○ ○ ○ ○ Adapter ×...
Copyright This user manual is protected by international copyright laws. No part of this manual may be reproduced, distributed, translated or transmitted in any form or by any means (electronic or mechanical), including photocopying, recording or storing in any information storage and retrieval without the prior written permission of the company.
Page 28
▇ Some of the instructions in the manual may not exactly match the device, depending on the device software and service provider. ▇ Power unit and accessories may differ from the icons in this manual, depending on country in which the power unit will be used.