Before First Use; Principle Of Operation - Adler Europe AD 7968 User Manual

Table of Contents

Advertisement

substances may result in a toxic or fire hazard.
19. The device may only be used with efficient ventilation.

BEFORE FIRST USE

1.Keep in mind that high humidity levels can encourage the growth of biological organisms in the environment.
2. Do not allow the area around the device to become damp or wet. If moisture occurs, lower (reduce) the mist output. Do not allow
absorbent materials such as carpets, curtains, tablecloths to get wet.
3. Place this device on a level surface. Do not place this product on a carpet, rug or other uneven place.
4. Do not place the device near electrical devices such as TV or sound equipment, etc. Do not let it spray directly on furniture, clothes or
walls, etc.

PRINCIPLE OF OPERATION

Through the ultrasonic wave, the diffuser breaks the water and essential oil into fine particles, the resulting cold mist diffuses the fresh
aroma.
WHICH OIL TO CHOOSE?
This aroma diffuser requires the use of water. There is no restriction on what kind of oil to add to the water, both essential oil/aroma
oil/complex oils/fragrance water are suitable for use.
PRODUCT DESCRIPTION: AD7968 Ultrasonic Aroma Diffuser
A. Mist outlet
E. Legs
I. Atomizer ceramic plate
M. MAX water level
USEAGE
Place the device in the place of intended use and do not move it during use.
1. Place the device on a flat surface and remove the lid (B). (FIG.2A)
2. Connect the USB cable to the USB socket (H) on the base (F).
3. Fill the tank with tap water to the maximum water line. (FIG.2B)
Do not overfill the water tank (C) above the MAX level (M.), otherwise the mist production may be low.
Do not use hot water. Never refill water during operation. Pour the essential oil vertically into the water tank. (FIG.2B)
The recommended dose is 2-3 drops of aromatic oil for a 100 ml tank.
4. Attach the ANTI-splash cover (FIG. 1). Put the lid (B) on the base. (FIG. 2C)
Note: The cover must be closed to use the product.
5. Connect the USB cable: (FIG. 2D)
- to the USB power adapter you already have at home, then plug the power adapter into a power outlet
or
to the USB input of the computer / power bank.
6.Two button operation:
Power/Mist Button (N):
B. Lid
C. Water tank
F. Base
G. Air inlet
J. Anti-splash cover
K. USB cable
N. Power/Mist button
O. Backlight button
4
D. Air outlet
H. USB port
L. Cleaning brush

Advertisement

Table of Contents
loading

Table of Contents