Table of Contents
Advertisement
substances may result in a toxic or fire hazard.
19. The device may only be used with efficient ventilation.
BEFORE FIRST USE
1.Keep in mind that high humidity levels can encourage the growth of biological organisms in the environment.
2. Do not allow the area around the device to become damp or wet. If moisture occurs, lower (reduce) the mist output. Do not allow
absorbent materials such as carpets, curtains, tablecloths to get wet.
3. Place this device on a level surface. Do not place this product on a carpet, rug or other uneven place.
4. Do not place the device near electrical devices such as TV or sound equipment, etc. Do not let it spray directly on furniture, clothes or
walls, etc.
PRINCIPLE OF OPERATION
Through the ultrasonic wave, the diffuser breaks the water and essential oil into fine particles, the resulting cold mist diffuses the fresh
aroma.
WHICH OIL TO CHOOSE?
This aroma diffuser requires the use of water. There is no restriction on what kind of oil to add to the water, both essential oil/aroma
oil/complex oils/fragrance water are suitable for use.
PRODUCT DESCRIPTION: AD7969 Ultrasonic Aroma Diffuser
A. Fog outlet
E. Power button
I. Chip that sprays ultrasonic waves
USEAGE
Place the device in the place of intended use and do not move it during use.
1. Place the device on a flat surface and remove the cover (B). (FIG.1)
2. Connect the Micro-USB cable to the Micro-USB socket (H) on the base (F) . (FIG.2)
3. Using a measuring cup or a glass, fill the tank with tap water to the maximum water line. (FIG.3)
Do not overfill the water tank, otherwise the mist production may be low.
Do not use hot water. Never refill water during operation. Pour the essential oil vertically into the water tank. (FIG.4)
The recommended dose for 70ml water tank is 2 drops.
4. Put the cover (B) on the base. (FIG.5)
Note: The cover must be closed to use the product.
5. Connect the micro USB cable:
- to the USB power adapter you already have at home, then plug the power adapter into a power outlet
or
- to the USB input of the computer / power bank.
6.One button operation (E):
- First press: continuous mist with alternating 7 RGB LED colors.
- Second press: continuous mist with frozen last glowing color.
B. Cover
F. Base
C. Water tank
G. Air inlet
5
D. Air outlet
H. Micro-USB port
Advertisement
Table of Contents
