TP-Link Archer AX12 User Manual page 36

Chapter 7
1. Go to Advanced >
2. Enable Smart Connect.
3. Keep the default values or set a new SSID and password, and click SAVE. This SSID
and password will be applied for the 2.4GHz and 5GHz wireless networks. If you want
to configure the wireless settings separately for each band, untick the checkbox to
disable this feature.
• To enable or disable the wireless function:
1. Go to Wireless or Advanced
2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the
all the wireless settings will be invalid.
• To change the wireless network name (SSID) and wireless password:
1. Go to Wireless or Advanced
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
• To hide SSID:
1. Go to Wireless or Advanced
2. Select Hide SSID, and your SSID won't display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
• To change the security option:
1. Go to Advanced >
2. Select an option from the
the default settings unless necessary.
• To change the transmit power and channel settings:
1. Go to Advanced >
2. Select an option from the
default and recommended setting is High.
3. If Smart Connect is disabled, you can also change the following settings:
• Channel Width - Select a channel width (bandwidth) for the wireless network.
Wireless > Wireless Settings.
> Wireless
Enable checkbox of each wireless network. In this case,
> Wireless
Network Name (SSID)
> Wireless
Wireless > Wireless Settings.
Security drop-down list. We recommend you don't change
Wireless > Wireless Settings.
Transmit Power
> Wireless Settings.
> Wireless Settings.
and customize the password for the
> Wireless Settings.
drop-down list: High,
Wireless Settings
Middle or Low. The
32